Powerful Blu-ray Burner software

DVDFab Blu-ray Copy can be used as a powerful Blu-ray burner. It can burn Blu-rays with many burning modes. This tip is about how to use this Blu-ray burning software to burn a Blu-ray easily and flexibly. Please follow me.

 

Step 1: Run DVDFab, choose Copy option, then load the Blu-ray source

After download and installation of DVDFab, run it and click the Copy option. Now insert the BD you want to burn into the Blu-ray drive connected to your PC and DVDFab will load it in one or two seconds later. If the source is a digital Blu-ray file, click Add button on DVDFab interface to load it then. The default copy mode in this tip is Main Movie. After the source is in, you can see the longest movie title being selected with audio tracks, subtitles and the first/last chapter changeable.

 

Step 2: Select a burning mode

If you don’t want to use the Main Movie mode, you can click the mode icon to bring about all supported modes. Let’s take Clone/Burn mode for example.

 

It will burn the source in 1:1 ratio, exactly as what it is, and you don’t need to do any settings.

 

If you want to burn a BD50 in a compressed way retaining all the disc content, just use “Full Disc” mode. Under this mode, you can choose the output as BD25. And you can also change the default volume label.

 

The “Customize” mode will allow you to burn any content as you like. And I’ll leave this for your exploration. Now go to the next step.

 

Step 3: Specify storage path and start burning

In the Save to box on the bottom of the interface, make sure to select the Blu-ray drive for burning the Blu-ray. Then click Start button to start conversion. During the process, you’ll be asked to insert a compatible disc to start the write process. Just do it. And leave the rest to DVDFab. Of course you can view detailed progress info. And you can also set your PC to shut down or hibernate when all tasks are done.

OK. That’s it. More info about DVDFab Blu-ray Copy can be found at: www.dvdfab.cn/blu-ray-copy.htm

Blu-ray Backup –Using DVDFab Blu-ray Copy

DVDFab Blu-ray Copy, when used during the 30-day trial period, is a free Blu-ray backup software. Don’t worry about the functionality since the trial version is packed with full features. It’s easy to use with many backup mode choices. This article is about how to use it.

 

Step 1: Run DVDFab -> Copy, load the source

Download and install DVDFab on your PC. Run it. Click Copy option. Now load the source by inserting the BD into the Blu-ray drive attached to your PC or clicking Add button. A couple of seconds later, the source content will be in. You can see from the following screenshot that the default copy mode is Full Disc.

 

Step 2: Choose a backup mode

If you’re not satisfied with the default backup mode, you can click the mode icon to select the one you prefer. Full Disc mode will process all the disc content; Main Movie mode will back up the longest title; Customize mode allows you to freely choose any titles to copy; Clone/Burn mode will clone/burn your Blu-ray in 1:1 ratio. Let’s use Main Movie mode for example in this article.

 

Step 3: Some optional settings

Hover your mouse over the title, then you can freely change its first/last chapter, audio and subtitles. On the left panel, you can specify the Output as BD50 or BD25. Then set a storage path. If you don’t want to use the default path in the “Save to” box, you can click the folder icon or the image file icon to the right of it to select a directory for your output movie folder or image file, which is also the way you set for the output type.

 

Step 4: Start backup process

Now go to press Start button to start the Blu-ray backup process. During the process you can monitor the progress with detailed info and set your PC to shut down or hibernate for the ending of all tasks.

 

OK. That’s all. More info about DVDFab Blu-ray Copy can be found at: www.dvdfab.cn/blu-ray-copy.htm

DVD Burner for Windows 8

If you are looking for a robust DVD burner for Windows 8, you may want to have a look at DVDFab DVD Copy, which runs very well on Windows 8 and can burn the DVD content flexibly in many copy modes. Read on for more.

 

One-step DVD burning

Run DVDFab after the download and installation. Go to Copy option. On the left panel click the copy mode icon to bring about all the DVDFab copy modes. Choose the “Clone/Burn” mode.

 

Insert the disc you want to burn into DVD drive, or drag the source digital file and drop it into the program. After the source is in, you don’t need to set anything. Go ahead to click Start button to start the burning process. And during the process, you’ll be asked to insert a compatible disc to start write process. Do it. Then leave the rest to DVDFab.

 

Many other modes for burning

You can also choose other copy modes to copy what you want flexibly. Do note that in the “Save to” box on the bottom of the interface, make sure to select DVD drive in order to burn the DVD.

 

Let’s look in detail about a couple of other modes.

 

The Full Disc mode will burn the whole DVD content. And you need to choose DVD5 or DVD9 on the left panel as the output size/type.

 

The Main Movie mode will burn only the longest movie title. The title will be selected by default once the source is in. You can freely change the audio tracks and subtitles of the title, and the first/last chapter as well so as to freely burn any part of the title.

 

OK. You can download and try this DVD burning software yourself, and explore the other copy modes we haven’t mentioned here. DVD Copy runs on Windows 8/7/Vista/XP (32-bit/64-bit).

Download or learn more about DVDFab DVD Copy, please go to: www.dvdfab.cn/dvd-copy.htm

Best Free DVD Copy Software

DVDFab DVD Copy probably is the best DVD copy tool in the world. And when being downloaded and used within its 30-day trial period, it then definitely is the best free DVD copy software since the full functions are active. Now let’s get an overview of it.

 

1. DVD copy software free download

Go to DVDFab official download page www.dvdfab.cn/download.htm to download and install DVDFab. And tap the full power of DVDFab within the 30-day period, for free.

 

2. DVD Copy operations

Run DVDFab and choose Copy option, you can see multiple copy modes that DVDFab supports, like Full Disc, Main Movie, Customize, Split, Merge and Clone/Burn. The most useful copy modes in my opinion are Full Disc and Main Movie.

 

Insert the DVD movie you want to copy into DVD drive, or drag the backup DVD digital file into the program. Seconds later the source will be in.

Source under Main Movie mode will show the longest movie title which is automatically selected by DVDFab, and you can change its first/last chapter, audio and subtitles.

 

Source under Full Disc mode will be copied with all the disc content:

 

Note: After the source is in, please go to specify the output size from DVD5 and DVD9 on the left panel of DVDFab interface, then move to the bottom part to choose a storage path for the output DVD folder or ISO image file, or select the DVD drive of or connected to your PC in the “Save to” box if you want to burn the DVD content into a blank DVD disc.

 

Then click Start button to start the copy process. During the process all detailed progress info can be viewed with no effort, and the PC can be set to shut down or hibernate, or the program can be set to exit, when all tasks are done.

 

OK. That’s all. More info about DVDFab DVD Copy, please go to: www.dvdfab.cn/dvd-copy.htm

How to Copy DVD Free with DVDFab DVD Copy

DVDFab DVD Copy is not free, but you can copy DVD free within the 30-day trial period, with full functions. So, the 30-day trial version in fact is a DVD copy freeware, probably the most powerful one. This tip is about how to copy DVD free with DVDFab DVD Copy. Now let’s dive down to the detail.

 

Step 1: Download DVDFab to use it within the 30-day trial period

Download DVDFab at www.dvdfab.cn/download.htm and install it according to the wizards. Then it can be used as a free DVD coping software for 30 days.

 

Step 2: Run DVDFab, and choose a DVD copy mode

Start up DVDFab after it’s installed. Choose the Copy option. On the left panel of the interface, click the copy mode icon to select the one you want to use among all the 6 DVD copy modes. Here we’re going to use Full Disc mode for example.

 

Step 3: Load in the source DVD and specify the size, type and path for the output

Insert the DVD disc you want to copy into the DVD drive then DVDFab will load it in just one or two seconds later. Or if the DVD is backed up as a digital file, just drag and drop the file into DVDFab. After it’s in, you’ll see it showing on the interface. Now go to the left panel to select DVD5 or DVD9 for the output size you like. Move to the bottom of the interface to specify a storage path for the output file which can be a folder or an ISO image file. Or choose the DVD drive of/connected to your computer here if you want to burn the DVD into a blank DVD disc.

 

Click Advanced Settings on the left panel, under the copy mode icon, and you can go to set the loop play mode for the output if you want, and you can also choose whether to copy non-DVD files.

 

Step 4: Start copy process

OK. Now go ahead to the main interface to hit the Start button. During the copy process, you can view detailed progress info, you can also set your PC to shut down, or hibernate, or set DVDFab to exit the program, when all tasks are done.

 

Alright. Now leave the rest to DVDFab. For more info about DVDFab DVD Copy, please go to: www.dvdfab.cn/dvd-copy.htm

How to Make Free DVD Copy with DVDFab

DVDFab DVD Copy is very powerful at copying DVDs with many copy modes, fast speed and high quality. It has a full-function 30-day free trial though it’s a paid software. To fully take advantage of DVDFab DVD Copy free, just download and use it within 30 days. During the trial period, it can be viewed as a top-class free DVD copy software. Now please follow me to have a look at how to use it to make a free DVD Copy.

 

Step 1: Download DVDFab and use it within the 30-day trial period

Download DVDFab at: www.dvdfab.cn/download.htm and install it according to the wizards. Within its 30-day trial period, it functions just as well as the paid version. You can use the free DVD copier for 30 days.

 

Step 2: Run DVDFab, choose a copy mode

After the installation, double click DVD icon to run it. Choose Copy option on the top of the interface, then on the left panel, click the copy mode icon to bring about all copy modes DVDFab supports. We’re choosing Main Movie for instance here.

 

Step 3: Load in the DVD source, specify output size, type and path

Insert the DVD disc into the DVD drive of/connected to your PC, or drag the backup digital DVD files into DVDFab. A couple of seconds later, the DVD movie will be loaded in. And the Main Movie mode has made DVDFab only load the longest main movie title. You can change its first/last chapter, audio tracks and subtitles. Now navigate to the left panel to choose an output size from DVD5 and DVD9. Then go to the bottom “Save to” part to specify a storage path for the output folder or image file. If you want to burn the DVD into a blank DVD disc, you should choose the DVD drive in here.

 

There’s an Advanced Settings button on the left panel. Click it and you can choose if to copy non-DVD files and set loop play mode for the output if you’d like.

 

Step 4: Start copy process

Click Start button on the main interface then the copy process begins. During the process, you can view detailed progress info, and set your PC to shut down or hibernate, or set DVDFab to exit the program, when all tasks are done.

 

OK. That’s all there is to it. For more info about DVDFab DVD Copy software, please visit: www.dvdfab.cn/dvd-copy.htm

How to Clone OS from HDD to SDD

SDD, short for Solid-state drive or Solid-state disk, is a data storage device that uses integrated circuit assemblies as memory to store data persistently. Most users know, the storage of SSD is much smaller than HDD. So if you have the need to migrate your OS along with applications and files from HDD to SDD, it's just like moving your whole big house to a small apartment, and the process is a test of time and patience.

But actually, there is no need to spend a whole day even several days to complete the HDD to SDD migration task. DVDFab PC Backup can help you with that easily and save you much time. Time is limited and valuable, so we shouldn't waste out valuable time in one meaningless thing.

Let's take a look at how to clone OS or other sorts of data you need from HDD to SDD efficiently with the powerfulHDD to SDD cloner software: DVDFab PC Backup.

 

Step 1: Download and install DVDFab PC Backup

If you haven't got one DVDFab PC Backup, then what comes first is download the latest version either from the product page or the download page, and then install it according to the prompts on the wizard.

 

Step 2: Start DVDFab PC Backup up, and opt for Clone

Boot up DVDFab PC Backup, then navigate to upper main window to choose Clone.

 

Step 3: Select what you want to clone to SDD

By clicking the related icon of Clone, the Disk/Partition Clone window is brought out with all the disks/partitions scanned and displayed. Select the system drive or disks containing other sorts of data you want to clone to SDD by ticking the related check-boxes, and click the Next to continue.

 

Choose the target, namely the SDD, for converting the data from HDD to. After that, move down, and navigate to the bottom left corner. Tick the check-box of Optimize to SDD. You can also select the Sector by sector clone, which will produce a higher-level clone image with a much bigger output size.

 

Step 4: Start to clone HDD to SDD

Now click the Proceed button, DVDFab PC Backup will immediately start to clone the data you need from HDD to SDD. During the process, you will get detailed progress information along with the elapsed time and left time.

 

OK, finished! For more information, please visit: http://www.dvdfab.cn/pc-backup.htm.

How to Copy Data from the Created Backup Image without Restoring the Entire Image

Apart from copying data by creating a backup plan like system backup, disk/partition backup, file backup, mail backup, etc., you can also directly copy data from the created backup image set before without restoring the entire image by DVDFab PC Backup. This complete PC backup and recovery solution also provides users the shortcut to browse and confirm the files and folders in a valid disk/partition image or system image, and copy what you need without much effort.

Following is the step-by-step guide about how to mount the created backup image to copy data directly with DVDFab PC Backup.

 

Before starting copying, please ensure that you have already correctly installed one DVDFab PC Backup. If not yet, finish that from downloading one either on the product page or download page, and then install it according to the wizard.

 

Step 1: Launch DVDFab PC Backup, and opt for Mount/Unmount from Tools

After installation, double click the desktop icon to call up DVDFab PC Backup. As it runs, navigate to the top right corner of the main window, and click Tools. Among all the available options, opt for the destination Mount/Unmount.

 

Step 2: Select the to-be-mounted backup image, or browse for it

On the popping up operation window of Mount/Unmount, select the system backup or disk/partition backup image with which the data you want to copy.

 

If the backup records have been deleted, click the Browse button at the top right corner to mount the backup image you want the copy data from, and click the OK button to continue.

 

Step 3: Select what you want to copy

When the backup image loads, you can confirm the content by clicking the History Version. After that, move down, and select the disks you want to copy by checking the related check-boxes.

 

Step 4: Start to copy

Click on the Proceed button, the data copying from created image task will be executed immediately. Thanks to the batch processing support and powerful engine of DVDFab, the whole process is finished just like in an eyeblink.

 

Note:

1. Mount/Unmount feature is only suitable for performing system backup and disk/partition backup image.

2. If the selected archive is encrypted, you need to type in the password you set before to continue the process.

3. Please create the image and mount it with same Windows account. This will ensure you the full access permission.

4. The mounted drive will automatically disappear after computer restarts.

5. For backup image unmount, you could click the Manage mounted drives button, and select the mounted drives to remove it by clicking the unmount button.

 

 

How to Wipe Data to Let It be lost Permanently

Usually, when you delete some useless data, it is not truly deleted, but stored temporarily for a short period of time instead. If you want to release your disks completely, and delete all the data you don't need any more permanently, chance is！The Wipe Data feature included in DVDFab PC Backup, can permanently erase the data on your disk or partitions.In addition, you can also set the Erase time to perform the data wiping task, otherwise, DVDFab PC Backup will erase the data on disks for three times by default.

 

Now, let's go with this powerful PC backup software to see how it wipes data permanently.

 

Step 1: Run DVDFab PC Backup, and choose Wipe Data from Tools

Get DVDFab PC Backup started. When it runs, navigate to the top right corner of the main window and click Tools to unfold all the available services. Then, choose Wipe Data among all the options.

 

Step 2: Select the disks/partitions with which the data you want to wipe

The wipe data window pops up following by the wipe data option is clicking. Here, all the disks/partitions of your PC have been scanned and displayed. Notice that, the boot partition or system partition can't be wiped. Except that, you can select all the rest or just specific disks/partitions with which the data you want to wipe permanently.

And you can also set the Erase time if you need DVDFab erase the disks for more than three times.

 

Step 3: Erase data

Now, just click the Proceed button to begin with the data erasing task. The whole task will be finished soon and during the process, you can get the detailed progress information including the elapsed time and left time.

 

OK, that's data wiping. It's unbelievably simple, right? Further information, please visit: http://www.dvdfab.cn/pc-backup.htm.

 

Notice: Once you use the wipe data feature, the data on disk will be lost and can't be retrieved any more. For important data, please use this feature with caution.

DVDFab Media Player 2 -- Free Blu-ray ISO Player

DVDFab Media Player 2 is a free Blu-ray ISO player, and it performs professionally with two playback modes for main movie playback and for menu navigation experience. Next is a simple demonstration of how to use it to play Blu-ray ISO, follow me if you’re interested.

 

Start DVDFab Media Player 2, and choose a Blu-ray playback mode

Open DVDFab Media Player 2, then click Main Menu icon in the top left corner, and choose Settings in the following pop up. Then let’s go to Blu-ray option, to choose a region code for the Blu-ray, and select a playback mode from Quick Mode and Menu Mode. Quick Mode will play only the main movie and Menu Mode will let users navigate via Blu-ray menu. Let’s choose Menu Mode for example.

 

Import Blu-ray ISO

Click Open File on the main interface to load in the source Blu-ray ISO you want to view, or just drag and drop it from your PC into the program.

 

The movie will be in very quickly. And it is showed in Menu Mode.

 

The movie will be in very quickly. And it is showed in Menu Mode.

 

OK. That’s a large picture of the free Blu-ray ISO player. For more info about DVDFab Media Player 2, please go to:http://www.dvdfab.cn/media-player.htm

How to Play Blu-ray ISO with DVDFab Media Player 2

DVDFab Media Player 2 can play Blu-ray ISO files easily and professionally. The superiorities of this Blu-ray player software can be seen from the following simple steps.

 

Step 1: Set playback mode for Blu-ray once for all

Let’s open DVDFab Media Player 2. First of all things, we need to set a playback mode for Blu-ray. Just go to the top right corner to click Main Menu icon then go to Settings. Navigate to Blu-ray in the Settings panel. Now we should choose a region code for the Blu-ray, and most of all, choose the playback mode from Quick Mode and Menu Mode. The former mode will play only the longest movie title, that is the main movie; the latter will give you a full navigation experience just like with a physical Blu-ray disc in a stand-alone Blu-ray Player. We’re using Menu Mode for example here.

 

Step 2: Load in the Blu-ray ISO source

Click Open File on the main interface to go to find the source and import it. Or, just drag and drop the Blu-ray ISO file from your local directory into the program.

 

And very soon the movie will be played. You can navigate via menu.

 

Note the Useful Playlist

At least one more thing you need to know about this media player is that it supports playlist which is very easy for you to switch between different movies or titles.

 

OK. Now you can enjoy your Blu-ray movie. More info about DVDFab Media Player 2, just go to:http://www.dvdfab.cn/media-player.htm